3M Platinum Plus Finishing Glaze with Hardener
In stock · Order before 2pm AEST for same-day SEQ dispatch
Specifications
- Resin/base type
- Polyester finishing glaze (self-levelling)
- Cure system
- Two-component, supplied peroxide hardener
- Sand time
- As little as 15 minutes
- Substrates
- Galvanised steel, steel, aluminium, fibreglass, wood, SMC, e-coat, OEM topcoats, cured/sanded epoxy and urethane primers
- Finish
- Smooth, pinhole-free, stain-free and tack-free
- Typical use
- Finish coat over body filler; minor scratches, pinholes, door dings
About this product
3M™ Platinum Plus Glaze is two-part premium self-leveling finishing glaze that can repair minor imperfections on properly prepared substrates such as galvanized steel, steel, aluminium, fiberglass, wood, SMC, E-coat, OEM topcoats, cured/sanded epoxy and urethane primers. This finishing glaze cuts the sanding time to as little as 15 minutes.
3M™ Platinum Plus Glaze can repair minor imperfections such as scratches, pinholes and door dings. This polyester finishing glaze can be used as a finish coat over body filler to fill pinholes and low filled areas. It may be applied on properly prepared steel, aluminium, galvanized, SMC, fiberglass and OEM paint surfaces. 3M™ Platinum Plus Glaze may also be used for industrial and architectural surfaces needing minor surface repairs. 3M™ Platinum™ Plus Glaze is very smooth to apply and can be sanded within 15 minutes. Use with the supplied peroxide hardener to achieve best results.
- Allows sanding in as little as 15 minutes
- Bonds well to galvanized steel, E-coat, metal, aluminium, fiberglass, SMC, OEM topcoats, cured epoxy, and urethane primers
- Stain and tack-free properties help ensure high-quality results
- Formulated to leave a smooth, consistent layer without any pinholes